Spare Hose 30 m
Spare Hose 30 m
AquaBreeze carries water from one source through a hose and adjustable nozzles. Plan your route, choose your watering points and assemble the system to suit your layout.
10m / 10 nozzles · 20m / 20 nozzles · 30m / 30 nozzles
Measure the hose route and count your nozzle positions. Check tap fit, water pressure and local watering rules before ordering. Assembly required. No timer included.
Couldn't load pickup availability
Estimated delivery: 6–10 business days, including processing.
View full details
Water where your plants actually are
Some plants sit in garden beds. Others in raised planters, greenhouses or pots. Most gardens have several areas that need water.
With AquaBreeze you run the water through your garden and place the nozzles right where the plants are.
One garden tap. Multiple watering points arranged around your plants.
The hose-and-nozzle system runs from your garden tap without electricity. Plan the route and adjust the spray to suit your layout.
Build the watering around your garden
AquaBreeze arrives unassembled, so you decide where the main hose runs and where each watering point goes.
Use it around, for example:
- flower beds and other garden areas
- raised beds and veggie patches
- greenhouses
- pots and balcony plants
- several planting areas along the same route
You adapt the system to your garden, not your garden to the system.
Product footage from our Norwegian storefront. Your water supply and layout affect the result.
How AquaBreeze works
- Lay out the main hose. Plan the route through the area you want to water.
- Choose your watering points. Decide where the nozzles should sit next to the plants.
- Fit nozzles and branches. Cut the main hose where you want a nozzle or a T-connector. Use T-connectors when the water needs to go in more than one direction.
- Adjust the spray. Turn the nozzle to go from a fine mist towards a more direct spray.
You decide where the water comes out and how the system follows your layout.
Installation and watering footage from our Norwegian storefront. Your supply and layout affect the result.
From fine mist to direct stream
Every AquaBreeze nozzle is adjustable. Turn towards a finer mist for a softer spray, or towards a more direct stream when that suits better.
That way you can tune each watering point without rebuilding the whole system.
Individual nozzles cannot be fully shut off.
Product footage from our Norwegian storefront. Your water supply and layout affect the result.
Plan first. Cut after.
- Lay the main hose along the route you want.
- Decide where the nozzles go.
- Plan any branches.
- Cut and fit once you are happy with the layout.
Tip: Cuts in the main hose are permanent, so plan the route first.
Water-wise tip: Check the current watering days, times and system rules for your address with your local water provider. Avoid runoff and overspray.
In the box
- The hose length and adjustable nozzle count shown for your chosen kit
- Two L-connectors
- One inlet connector with an integrated filter
- T-connectors and cable ties; quantities vary with kit size
Assembly required. No built-in timer; a watering timer is not included.
Before you choose your kit
Will it fit my tap?
Yes—AquaBreeze is compatible with ordinary Australian garden-tap connections. The included inlet connector has internal threads for 1/2-inch and 3/4-inch tap connections; a normal garden quick connection can also be used. Check non-standard fittings or special setups before ordering, as these may need an adaptor.
What water pressure does it need?
Current operating guidance is 200–600 kPa (2–6 bar), with at least approximately 25 litres per hour available for the whole system. These are operating guidelines, not certified ratings. Check your supply at the intended connection. Performance varies with layout, nozzle count and supply.
What is included, and how do I assemble it?
Each kit includes the stated hose length and nozzle count, two L-connectors and one inlet connector with an integrated filter, plus T-connectors and cable ties whose quantities vary with kit size. The kit arrives unassembled. Plan before cutting the main hose. Individual nozzles adjust from mist towards spray, but cannot be fully shut off.
How much area will it water?
Hose length is not a coverage rating, and one nozzle does not equal one plant. There is no verified coverage area or spray radius for each kit. Measure your hose route and plan your nozzle positions.
Is a timer included?
No. A timer is not included in any of the three kits.
What should I check before use?
Check current watering-system rules for your address with your water provider. This is an adjustable mist-and-spray system; do not assume drip-irrigation or smart-system exemptions apply. Avoid runoff and overspray.
What about heat, tank water or a pump?
Australian outdoor durability, UV and temperature ratings have not been verified. Tank, pump, bore-water and water-quality compatibility also remain unverified. Do not assume these uses are supported.
Ready to plan your setup?
Measure roughly where the main hose should run and how many watering points you want.
Pick the kit that fits your layout and place the nozzles where your plants need water.
Standard delivery is included. Estimated delivery to Australia is 6–10 business days, including processing.